The Poly-Set from Red Head (available at The Home Depot) for light-duty use with shelves, mailboxes, and frames. Newer polyethylene expansion anchors twist as you drive them into brick, resulting in superior holding power. But in comparison to drywall or plaster, a brick wall is able to carry a much heavier load. As above, you have a variety of wall anchors from which to choose. If you want to hang a heavy mirror on a brick wall, it’s a little more work. Do the masonry nails go into the brick or the mortar? Is there a safe way to do this? I have 100-pound gauge wire (doubled), heavy-duty hooks, and masonry nails, but I’m still afraid it’s going to fall. Q: I am trying to hang a 75-pound mirror on a brick wall. For plaster walls, use a 3-inch screw in order to be certain that at least two inches of the screw threads bite into the stud. But if you get lucky and there happens to be a stud in the position where you would like to hang a mirror, then use a 2½-inch wood screw for a wall with ½-inch drywall. The only downside of relying on studs is that you cannot control their location they are seldom located on the part of the wall where you want to hang an item. RELATED: 7 Everyday Objects You Never Thought to Hang If you can locate and screw into a stud, you can hang a heavy mirror from a picture hook without an anchor. First, check to see how each one is rated for the type of wall material on which you’re planning to hang your mirror. Pre-drill and place the anchor into the wall, then insert an appropriate sheet metal screw to secure the picture hook.īesides winged anchors, other options include self-drilling screw anchors, molly bolts, and strap toggles. That flexibility comes in handy if you have not determined precisely where to position the mirror. In your case, I would recommend a winged anchor, such as the Pop-Toggle from Hillman (available on Amazon), in part because its screw may be withdrawn and reinserted any number of times. Use a winged anchor designed to hold the weight (or more) of your large mirror. When the toggle bolt is secured, the pressure of the toggle on the opposite side of the wall will hold most any object in place.A: Your mirror is too heavy for picture hooks alone, but a wall anchor would likely do the trick to attach them to a wall made of drywall or plaster.Ī variety of drywall anchors are available these days, each with a slightly different design all are more reliable than the old-fashioned ribbed plastic plugs. Once the toggle bolt is in place, use a screw driver to tighten the bolt to the wall. Push the toggle through the wall until the toggle wings spring freely open. Thread the toggle onto the screw end with the wings of the toggle folded inward, pointing toward the head of the screw. Insert the machine screw through the mounting bracket of the object to be hung. To use a toggle bolt, drill a hole large enough for the folded toggle to slip into the wall. These butterfly-like toggles thread onto long machine screws and offer the best support for securing objects to plaster walls. Option 4: For heavier items, toggle bolts are the best option. To reduce plaster damage, place a small piece of transparent tape on the wall before hammering the nail into place. The mounting nail angles through the hook and into the wall holding the hook in place with a simple lever design. These small “J” shaped metal hooks come in various sizes and can hold up to 100 pounds of weight. Option 3: Standard picture-hanging hooks work wonders in plaster walls. For best results, clean surfaces with rubbing alcohol before installing any type of adhesive hook. Available in a wide range of options, these self-adhesive hooks stick well to most surfaces and leave no residue when they are removed. Option 2: For walls lacking picture rail molding, 3M’s Command line of hooks are an easy solution. Special molding hooks are available at most local hardware stores and can be permanently mounted in place with a small screw for added security. Flat metal molding hooks and long strings or ribbons were then used to hang artwork down at eye level from the rail tops. Option 1: In days of yore, builders often installed wooden picture rail molding a few inches from the ceiling around the perimeter of the room. There are a few good options to consider when trying to hang something on a plaster wall. Depth finders help locate studs behind the plaster, but drilling through plaster and lathe into a stud is often problematic. Hanging anything onto a plaster wall is a bit of a challenge.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |